Markem-Imaje 9750 CIJ Printer for Extruded Cable and Pipe
The 9750 is Markem-Imaje's continuous inkjet coder for medium to heavy duty lines, and on an extrusion line it does one job: prints the meter mark, the cable type, the standard reference and the customer code onto the product while it is still moving, without touching it.
There is no ribbon, no label and no contact. The head sits 5 to 10 mm off the surface and fires the code onto the insulation as the cable or pipe runs past. At up to 6.6 m/s, that is the only way to code an extrusion line without slowing it down.

Why Extrusion Needs Its Own Setup
An extrusion line is not a packaging line. The product does not stop, the surface is often still warm, and the material decides whether the ink stays.
Polyethylene and PVC take dye ink differently. Standard dye marks absorb and stay legible on PVC; on PE, and on black or coloured compounds, a dye mark disappears into the surface. That is why pigment ink exists for extrusion: the pigment sits on the surface as a contrasting layer, which is how you get a white or light code on a black cable.
Speed changes the problem again. On a fast wire line the code is stretched along the length of the product at the moment of printing, so the characters come out elongated or, at worst, unreadable between the meters. Markem-Imaje's answer is the Ew+ printhead with enhanced Jet Speed Control, which holds a 2 mm code legible at up to 1,000 m/min.
Name1
Name2
What to Check Before You Order
Ink versus polymer. Tell us the insulation compound and its colour. PVC and PE do not take the same ink, and a black compound needs pigment if the code has to contrast.
Line speed at the print position. Not the haul-off speed on the nameplate: the speed where the head actually prints, after any accumulation.
Distance and access. The head prints best at 5 to 10 mm. If the line has a water trough or a diameter gauge in the way, the print position moves, and the bracket has to suit it.
Washdown. IP56 is the standard and needs no plant air. If the area is washed down, IP66 is the option, and it does need an air supply.
Frequently Asked Questions
Can it print on PE and on black cable?
Yes, with pigment ink. Dye ink on black PE gives a mark you cannot read; pigment lays a contrasting layer on the surface. That is the reason the E+ build exists, so one machine can run dye and pigment jobs.
Will the code stretch at high line speed?
On a fast wire line, a standard head stretches the code along the run. The Ew+ printhead with enhanced Jet Speed Control is the build for that, and Markem-Imaje rates it at a 2 mm code up to 1,000 m/min.
Does it need compressed air?
No. The standard IP56 unit runs without plant air. Air is only needed if you take the IP66 washdown option or the printhead pressurisation kit.
What about spare parts and ink?
Printheads, ink cartridges, filters and the modules around them are what we supply alongside the machine. Send the part number from the old unit and we confirm it against your build.
Related Products
Markem-Imaje 9330 CIJ printer for cable printing https://www.ablepack.co/cable-printing-machine-markem-imaje-9330-5-lines.html
Markem-Imaje 9410 CIJ printer https://www.ablepack.co/industrial-continuous-inkjet-printers-cij-markem-imaje-9410.html

